Agricultural resources are valuable to our entire planet as they give us the air we breathe, the food we eat, the nutrients we need, and are often used to produce medical antidotes. That is why they are so important to maintain and protect.
Over the years, mass urbanisation has taken place in Indonesia, leading many to pack their bags and trek to centres like Jakarta. It has been said that this migration takes place due to unbalanced development and lack of security.
Since agricultural resources are a main staple of these rural areas, there must be enough land and crop production to meet this demand. This need can be met by modernising agricultural processes.
As M. Ikhsan Shiddieqy, Researcher at Indonesian Agency for Agricultural Research and Development, Ministry of Agriculture has shared through his research, “Agricultural modernization leads to the enhancement of crop production. The increase of agricultural production means there will be increase of the farmer’s income as well. This will make farmers feel more confident in facing their future. The government can make this happen with, for example, utilization of energized well-irrigation and fertilizer distribution.”
Indonesia aims to increase its agricultural production through the use of advanced technology. In order to meet the growing demand, they must introduce modern agricultural tools and technologies to farmers.
While in Merauke, a regency in the Papua province, President Joko Widodo stated, "The government will mobilise support to farmers and businessmen until the target of 1.2 million hectares of agricultural land that can provide harvest three times a year is achieved.”
The Government plans to introduce machines which will be used for planting through harvesting. This is the first known instance of using machinery in crop production and management.
Through this plan, the Government is prompting regional authorities to help the farmers in transitioning to using these technologies.
President Jokowi says this development should take 2 years to implement. Effects on irrigation and using underground water will be monitored closely as well.
This plan follows the 3 year vision for Indonesia to be self-sufficient in producing rice, corn, and soybeans. This target was set by President Jokowi for the Ministry of Agriculture to reach.
The Institute for Digital Molecular Analytics and Science (IDMxS), which aims to promote the science of analysing biological molecules (biomolecules) using information technology and data science, was recently established by Nanyang Technological University, Singapore (NTU Singapore). This could pave the way for real-time environmental or health data monitoring and analysis, like how real-time traffic data can be obtained on mobile devices.
IDMxS, NTU’s newest national Research Centre of Excellence (RCE), is funded with a total investment of over S$160 million over 10 years, with the majority coming from NTU and the National University of Singapore and S$94 million coming from the Singapore Ministry of Education.
Digital molecular analytics, a novel scientific discipline that analyses individual molecules to discover, identify, and measure biomolecules with extraordinary accuracy, is at the core of the work done at IDMxS.
Such a science will open many new areas of research, such as the creation of diagnostic testing capabilities that may then inspire the creation of new technologies and commercial spinoffs, including blood testing kits that can generate findings instantly using nothing more than a smartphone camera.
The interdisciplinary centre is anticipated to house 100 full-time researchers and employees with backgrounds ranging throughout the spectrum of engineering and science, from optics, computer science, and artificial intelligence (AI) to biology, medical technology, and chemistry.
Postgraduate students from NTU will have exceptional chances for interdisciplinary education and training that spans the molecular sciences and information technology through the graduate programme of IDMxS. More than 30 PhD students will receive support from the Centre, four of whom have already begun their studies. As clinical diagnostics become more digital, IDMxS will also create continuing education programmes aimed at developing and modernising the healthcare workforce.
By fusing the fields of biology and information technology – which have each recently undergone revolutionary changes – IDMxS will create the new science of digital molecular analytics. The objective is to develop tools that can track environmental data, such as air and water quality, and health information, like viral infections or molecular signatures that signal the existence of a disease, in real-time. To develop innovative solutions for issues with health, sickness, and environmental monitoring, this process begins with the development of fundamental science.
The ability to simultaneously gather a variety of data types from a biological sample and use tools like AI and machine learning algorithms to analyse and interpret the enormous volume of data that would otherwise be impossible for humans to make sense of is at the core of IDMxS’ digital molecular analytical strategies. The research centre intends to someday spin out solutions like widely used software using digital molecular analytics.
Moreover, making blood sample test kits is one potential use for digital molecular analytics that IDMxS is investigating. The goal of this research is to create a tool that can recognise the various chemicals responsible for illnesses, infections, and diseases.
This suggests that a physician might someday be able to take a blood sample, analyse it with a smartphone camera, and obtain an accurate, real-time reading next to the patient at the doctor’s table. A similar idea might do away with the necessity for additional time-consuming laboratory tests.
The extensive surveillance of illnesses spread by insects like dengue and malaria is another project that is now under development. Researchers can one day create an imaging system that can swiftly detect and monitor dengue among the mosquito population by recognising and analysing the chemicals that make up the dengue virus. Such studies might also be used to track other airborne infections and infectious diseases, in addition to insect-borne diseases that affect urban health.
In a bid to become a digital airline, the Vietnam Airlines Engineering Company Ltd (VAECO), a subsidiary of Vietnam Airlines, has signed a cooperation agreement with private players to deploy an aircraft maintenance and engineering management software system. Under the agreement, the system will provide technical management tools, manage the maintenance programme more closely, and more efficiently synchronise data. This will contribute to reducing maintenance costs and time, improving the operational readiness factor for the fleet.
The software also provides tools for planning, controlling maintenance procedures, and managing human resources to optimise production processes. It will minimise labour costs for recording and data entry and work control, leading to an overall increase in labour productivity, by an estimated 15-20%
The software provides synchronous information about failure status, maintenance history, and the status of spare parts. This enables technicians to make effective and timely repair decisions. It is expected to reduce flight stoppages, delays, and cancellations.
Furthermore, the system will shorten the aircraft maintenance time and create favourable conditions for the airline to concentrate human resources to expand the outside maintenance market share. The Deputy General Director of Vietnam Airlines, Nguyen Chien Thang, noted that the new technology will make an important contribution to helping VAECO become a leading aircraft maintenance service provider in the region while accelerating digital transformation.
Currently, Vietnam Airlines is the airline with the largest fleet in Vietnam, with more than 100 aircraft including Boeing 787, Airbus A350, A321, A321neom, and ATR72. The airline is constantly modernising its fleet, as well as improving its aircraft maintenance capacity and mastering new technologies.
In January, the airline launched two e-commerce platforms VNAMAZING, VNAMALL as well as its Vietnam Airlines Gift Card. The services were the first of their kind in the domestic aviation sector. VNAMAZING offers online tourism services including tour and accommodation bookings. VNAMALL provides a wide range of aviation and non-aviation goods and services.
As OpenGov Asia reported, the Vietnam Airlines Gift Card is a product available on VNAMALL, which can be used to exchange airline tickets or avail of business class upgrade benefits on flights operated by Vietnam Airlines, Pacific Airlines, and VASCO. An official from Vietnam Airlines said that the airline considers e-commerce development one of its top priorities.
In August, the carrier announced that passengers using the airline’s air service can now access a free-of-charge news-reader application called PressReader for Vietnamese and international publications. The application provides more than 7,000 digital newspaper and magazine titles available in over 70 languages. According to Vietnam Airlines, passengers can use the application 24 hours before the scheduled departure time and 24 hours after landing.
To use the app, passengers must download the Vietnam Airlines app, choose the PressReader button, and verify their booking code and flight information. Articles can be read online or downloaded for offline reading.
Most recently, Vietnam Airlines launched an online check-in service for passengers departing from Phu Bai airport in the central province of Thua Thien-Hue. The move increases efficiency and improves customer experience and convenience. Passengers are now able to check in via the official portal or the Vietnam Airlines application within 24 hours to one hour ahead of departure.
The seven best smart cities in Indonesia were announced at the Ministry of Communication and Informatics seminar and exhibition on the Movement Towards Smart Cities (Smart City) in 2022 in Jakarta. Representatives from 141 regencies attend the event in a framework for evaluating the implementation of the Smart City 2022 program.
District/city officials who have succeeded in developing a master plan under the Smart City development in their respective regions attended. The session was organised to showcase the commitment of all regional leaders so that the community see the benefits and progress, said Bambang Dwi Anggono, Director of Government Information Application Services (LAIP) of the Ministry of Communication and Information.
The five best cities and two districts took the Smart City award in the following categories:
- Smart Governance: City of Bandung,
- Smart Branding: Surakarta City,
- Smart Economy: Semarang City,
- Smart Society: City of Yogyakarta,
- Smart Living: Demak Regency,
- Smart Environment: Madiun City, and
- National Priority Tourism Area: Wonogiri
The Smart City initiative is a strategic step toward addressing development plans holistically. The programme aims to harmonise regional government sectors and regional initiative programmes with other regional governments, the central government, the business world, and even other countries. Local governments can work together with other local governments, businesses, academia, and the general public to launch various initiatives that will have a positive impact.
The Smart City Movement aims to guide regions and cities across Indonesia in designing digital-based development that considers each region’s potential and challenges. Furthermore, the Smart City programme can bring innovations from Jakarta to other areas, ensuring an even distribution of development programmes.
The Ministry of Communication and Information has facilitated interconnection with relevant parties in the Smart City development. In addition, the Ministry, through the LAIP Directorate, intends to include 50 regencies/cities in the Smart City master plan assistance in 2023.
“We hope that regional leaders (regents/mayors) will have the courage to innovate and make breakthroughs for the good of society. Correspondingly, we encourage regional heads to become change agents in these breakthroughs (SPBE),” said Bambang Dwi Anggono.
The Ministry intends to implement Smart Province next year. The Smart Province programme will select two provinces in 2023 to prepare the master plan. Smart Province development conceptualises development innovations at the provincial level and coordinates Smart City development at the district level within its jurisdiction. Two provinces will be selected to help prepare the master plan.
Semuel Abrijani Pangerapan, Director General of Informatics Applications at the Ministry of Communication and Information, emphasised the importance of digital transformation as a foundation for building smart cities.
“Creating a Smart City begins with digital transformation; from there, every local government understands what is required. Because each Regional Government has unique characteristics. But, in the end, everything will point to the holistic Smart City that we taught,” he was quoted as saying.
He also stressed the importance of creating a master plan for the long-term development of Smart Cities as establishing a smart city would take 15 to 20 years. As a result, the Ministry has created a programme to educate local entities on constructing a Smart City.
The Infocomm Media Development Authority (IMDA) announced the launch of a S$5 million Virtual Production Innovation Fund to support the local media industry in developing the capabilities needed to harness virtual production technology to maintain the local media industry’s competitiveness as the international partner of choice to create premium IP.
To enable the camera to capture actors and visual effects in real time, virtual production technology uses LED panels to produce realistic background landscapes for television or movie sequences driven by video game engines. The site, road closures, location costs, permits, weather, set construction, and space rental will no longer be necessary for production.
With the help of technology, Singapore has a rare chance to get over some of its physical constraints, like the lack of suitable locations for on-location filming and room for large sets.
The ability of the storytellers to reproduce historical sites or any other environment will allow them to generate content that was previously impossible. This will revolutionise the creative process of storytelling.
The adoption of virtual production by the media sector is further encouraged by the strong signals emanating from international media giants that this technology will be widely employed in the creation of movies and television shows and will become the standard in the next years.
To strengthen capabilities in virtual production and ensure that the media companies and talent can keep up with international production methods to remain competitive, IMDA will pursue a two-pronged strategy to prepare the media sector for the future.
The National Film and Television School (NFTS) in the UK has collaborated with IMDA to adapt the school’s Certificate in Virtual Production course to the requirements of the sector to train media professionals to use this technology.
From December 2022 to April 2023, fifteen professors, trainers, and media professionals from Singapore will participate in virtual lectures and undergo hands-on training at NFTS’s virtual production facilities.
Over the course of the following 12 months, several masterclasses and workshops given by professionals from the business will be offered. A Singapore-based firm that specialises in developing immersive experiences, held a display to exhibit how virtual production can enhance imaginative storytelling.
Hands-on demonstrations will be given by guest speakers from virtual production leaders. They will discuss and explore best practices in the workflow to inventive ways to use different technology in storytelling.
Local businesses can also test out virtual production to realise their creative ideas for brief pieces of content, such as music videos, short films, and brand advertisements, among others. Companies can submit their suggested content concepts from now until February 15, 2023.
The capacity to best utilise virtual production technologies to realise a project’s creative vision will be taken into consideration while evaluating proposals.
Additionally, IMDA is working to organise an industry challenge with an internationally renowned gaming company. This challenge will encourage organisations to experiment with and use the cutting-edge real-time 3D creation tool developed by this gaming company. Currently, the aforementioned tool powers globally popular video games.
Teams whose concepts are shortlisted will receive personalised coaching and training from the gaming company. In addition, they will receive prize money from IMDA to assist with content creation.
Since virtual production technology has advanced in recent years, the country is now able to produce visual effects in real-time without building actual sets, thereby overcoming the constraints of scale, complexity, and space.
India will Chair the Global Partnership on Artificial Intelligence (GPAI), an international initiative to support the responsible and human-centric development and use of artificial intelligence (AI).
The Minister of State for Electronics and Information Technology (MeitY), Rajeev Chandrasekhar, represented India virtually at the GPAI meeting held in Tokyo for the symbolic takeover from France, which is the outgoing Council Chair.
Chandrasekhar stated that the country would work in close cooperation with member states to put in place a framework to fully exploit the power of AI for the good of consumers across the globe. This means ensuring there are adequate guardrails to prevent misuse and user harm.
According to the Minister, India is building an ecosystem of modern cyber laws and frameworks based on three principles: openness, safety, and trust and accountability. With a National Programme on AI and National Data Governance Framework Policy (NDGFP) in place as well as one of the world’s largest publicly accessible datasets programmes in the works, the Minister reiterated India’s commitment to using AI to catalyse innovation and create good, trusted applications.
The NDGFP strives to ensure equitable access to non-personal data and improve institutional frameworks for government data sharing, promote principles around privacy and security by design, and encourage the use of anonymisation tools. It also aims to standardise the way the government collects and manages data. The NDGFP along with an envisaged Indian Data Management Office (IDMO) shall catalyse the next-gen AI and data-led research and startup ecosystem.
Through the datasets programmes, anonymised non-personal data will be available for the entire AI ecosystem. The AI market globally was nearly US$ 59.67 billion in 2021 and is projected to grow at a compound annual growth rate (CAGR) of 39.4% to reach around US$ 422.37 billion by 2028. With the rapid growth of AI and machine learning (ML), experts predict that most businesses will shift to AI-powered systems, apps, security systems, data analysis, and other applications in the future. AI is expected to add US$ 967 billion to India’s economy by 2035 and US$ 450–500 billion to India’s GDP by 2025, accounting for 10% of the country’s US $5 trillion GDP target.
A government official outlined India’s priorities as Chair GPAI next year, stating that the country would focus on promoting greater involvement of the global south in the conversation regarding the use of AI for solving societal problems. The country has also emphasised the need for the responsible and ethical use of AI.
GPAI is a congregation of 25 member countries, including the United States, the United Kingdom, the European Union, Australia, Canada, France, Germany, Italy, Japan, Mexico, New Zealand, the Republic of Korea, and Singapore. In 2020, India joined the group as a founding member. It is a first-of-its-type initiative that aims to better understand the challenges and opportunities around AI. It works in collaboration with partners and international organisations, leading experts from industry, civil society, governments, and academia. These stakeholders collaborate to promote the responsible evolution of AI and guide the development and use of the technology, grounded in human rights, inclusion, diversity, innovation, and economic growth.
The Hong Kong Polytechnic University (PolyU) recently announced that a PolyU-supported start-up has successfully developed the Nano Multi-rings Defocus Incorporated Lens for controlling the progression of myopia (or short-sightedness).
The start-up collaborated with the State Key Laboratory of Ultra-precision Machining Technology (The Hong Kong Polytechnic University) (SKL-UPMT) and the School of Optometry of PolyU to create the new solution by integrating DISC technology and Ultra-precision Nano Multi-rings Machining Technology, offering children and adolescents a convenient, non-invasive and effective option to delay myopia progression.
PolyU holds the patents for both DISC technology and Ultra-precision Nano Multi-rings Machining Technology. The launch of the Nano Multi-rings Defocus Incorporated Lens signifies the University’s long-term commitment to driving research and innovation and its continuous effort in facilitating knowledge transfer and research commercialisation by supporting cutting-edge technology start-ups.
PolyU’s School of Optometry invented the novel DISC technology, which is proven to retard the myopia progression of children by 60%. The method produces a clear image on the retina and a defocused or blurred image in front of the retina simultaneously, enabling children to have clear vision while controlling the development of myopia. Based on this technology, the DISC-SH soft contact lens was introduced in 2018.
The Ultra-precision Nano Multi-rings Machining Technology, developed by SKL-UPMT, merges advanced optics design, ultra-precision machining and ultra-precision measurement technologies, and ultra-precision mould-making to apply DISC technology in spectacle lens production. By employing an ultra-precision process, the new spectacle lens provides added comfort for wearers, while offering more stable vision. The non-invasive design also makes it more suitable for children of different ages.
The Visiting Chair Professor of the School of Optometry of PolyU and Co-founder of the start-up noted that the partnership with SKL-UPMT and the School of Optometry to launch the new Nano Multi-rings Defocus Incorporated Lens resulted in a breakthrough in DISC technology. This initiative helps address the spiralling myopia problem among children, especially in markets with a relatively high ratio of myopes such as Hong Kong, Singapore and mainland China.
The Professor of the Department of Industrial and Systems Engineering and Director of SKL-UPMT at PolyU stated that ultra-precision machining technology is a multi-disciplinary advanced manufacturing technology, which is the backbone of crucial industries like optometry, semiconductors, advanced optics, aerospace, energy, biomedical and new materials development.
He noted that SKL-UPMT is at the forefront of the development and application of technologies and have a proven track record in designing and implementing new methods, process, systems and facilities in ultra-precision machining and ultra-precision measurement.
The locally developed Ultra-precision Nano Multi-rings Machining Technology was extended to fine-tune and manufacture optometric products and will continue to create new technologies and solutions for diverse industries to benefit society. In doing so, Hong Kong and mainland China’s competence and strategic advantages in design and advanced manufacturing will be furthered, he said.
The Nano Multi-rings Defocus Incorporated Lens is expected to be rolled out in Hong Kong and mainland China soon. The company will continue collaborating with PolyU to develop new myopia control products based on DISC technology to protect the vision health of children and adolescents.
Founded by PolyU’s professor and alumni, the start-up has received financial support from the PolyU Micro Fund and the PolyU Tech Launchpad Fund. In 2018, the company secured a licence from PolyU for commercialising DISC technology, which the start-up manufactures and distributes DISC lenses at its authorised optometric clinics and fitting centres.
Four industry titans in technology have been given contracts for the Joint Warfighting Cloud Capability (JWCC), according to the Department of Defense (DoD) of the U.S.
JWCC is a multiple-award contract vehicle that will give the DoD the chance to obtain commercial cloud capabilities and services directly from the commercial Cloud Service Providers (CSPs) at the pace of mission, at all classification levels, from the corporate headquarters to the tactical edge.
With this Indefinite-Delivery, Indefinite-Quantity (IDIQ) contract vehicle, cloud services can be provided more quickly and at commercial cost, if not better.
The following capabilities will now be available to warfighters under a single contract thanks to JWCC: global accessibility, readily available and resilient services, centralised management and distributed control, usability, commercial parity, elastic computing, storage, and network infrastructure, advanced data analytics, fortified security, and tactical edge devices.
Those interested in knowing more about JWCC, register for the JWCC Customer Portal or contact the Defense Information Systems Agency (DISA) Hosting and Compute Center (HaCC), can visit this website.
To make cloud purchasing, provisioning, and onboarding simpler for DoD clients, DISA has created user-friendly cloud accelerators.
In addition, the DoD MIIs build a national network of public-private partnerships, establish an industrial common for manufacturing R&D, and advance workforce education and development while accelerating new technologies using federal funding combined with matching investment from academia, industry, and state governments.
The network strategically coordinates resources to solve important technologies and create interconnected manufacturing systems by marshalling the greatest talent from around the nation. The nine MIIs supported by the DoD are under the direction of ManTech, the DoD Manufacturing Technology Program.
Finding industry partners, including small enterprises, that have cutting-edge technology that could help the warfighter is essential to the DOD MII mission. DoD makes investments in these sectors of advanced manufacturing through the MIIs.
Conversations with some research institutes earlier this year shed light on how the DoD and the country are benefiting from the pace of technology.
Combining silicon integrated circuits with semiconductor lasers is known as silicon photonics – a speciality of the American Institute of Manufacturing — Integrated Photonics.
Compared to conventional electronics, this technology allows for faster data transfer over greater distances while making use of the advantages of high-volume silicon production.
COVID sensors are some of the most fascinating applications for photonics. The Coronavirus Aid, Relief and Economic Security Act provided funding for sensors that can identify COVID-19 from a drop of blood in less than a minute.
In various sensor regions of the chip, there are proteins linked to SARS-CoV-2 and eight other viruses. Antibodies to those viruses will bind to the proteins in a blood sample and be found if a person has been exposed to any of the viruses.
On the other hand, additive manufacturing creates parts that can be formed of ceramics, rubber, metal, plastic, rubber, and polymers. The ability of the military to build parts additively improves its capacity for swift and agile operations, particularly in hostile circumstances.
The qualification and certification of processes and materials are other areas of emphasis for some manufacturers. The primary obstacle to manufacturers fully embracing additive manufacturing is a lack of training and certification.
The manufacturing sector also examines how the supply chain’s capacity compares to the need for components made additively.
Together, these initiatives are assisting the U.S. in strengthening its manufacturing sector and taking the lead in global competitiveness.